Concrete Deterioration and Protection Publications

Issues That Do Not Meet The Eye: Design Considerations for Lining Concrete Sludge Mixing and Storage Tanks in Wastewater Treatment Plants [R. Nixon]
Introduction to the Deterioration of Concrete (Applicator Training Bulletin) [R. Nixon]
The Fundamentals of Cleaning and Coating Concrete [R. Nixon]    
Protecting Concrete with Resinous Floor Toppings:  An Owner's Guide [R. Nixon]
The Basics of Corrosion of Concrete in Waste Water Systems [R. Nixon]  
Future Material Selection Guidelines for Coatings on Concrete for Changing Exposure Conditions in Large Municipal Waste Water Collection/Treatment Systems [R. Nixon]  
Assessing the Deterioration of Concrete in Pulp and Paper Mills [R. Nixon]
Concrete Deterioration in Pulp and Paper Mill Structures:  Difficult Repairs Require Innovative Solutions [R. Nixon]
Corrosion and Types of Reinforcement to be Used in Concrete Structures in Pulp & Paper Mills (2000 Panel Discussion on How to Avoid Corrosion of Steel Reinforced Concrete Structures) [R. Nixon] 
Degradation of Reinforced Concrete Machine Beams in the Dryer Sections of Paper Machines [R. Nixon] 
Lessons to be Learned from Rehabilitation of Concrete Structures in Bleach Plants in Pulp and Paper Mills [R. Nixon]
Design Considerations for Lining Concrete Sludge Mixing and Storage Tanks in Wastewater Treatment Plants: Issues that Do Not Meet the Eye [R. Nixon]


Service Areas

  • Corrosion and Materials Engineering
    • Corrosion Control/Protection Design
    • Corrosion Analysis and Material Selection Consulting
    • Failure Analysis - Mode and Root Cause Analysis
    • Cathodic Protection System Design and Evaluation
  • Structural and Mechanical Rehabilitation Services
    • Structural Design Engineering
    • Mechanical Design Engineering
    • Condition Assessment Evaluations
    • Structural Evaluation and Analysis
    • Shop and Field QC Inspection and Support
  • Mechanical Integrity and Inspection Design Services
    • Pressure Vessel and Tank Program Development and Implementation
    • Systematic Inspection Design (SID)
    • Risk-Based Inspection
    • Integrity Evaluation and Analysis
    • Fitness-for-Service Evaluations
    • Welding Consulting and Inspection
  • Coatings and Linings Engineering
    • Consulting
    • Failure Analysis
    • Project Management
    • Quality Control and Inspections
  • Project and Quality Management Services
    • Cost Estimating Services for all Construction Disciplines
    • Project Management Services, Including Planning, Scheduling, and Project Controls
    • Quality Control Inspection and Testing Services
    • Quality Assurance Program Development for New and Rehabilitation Construction
    • Quality Assurance Program Auditing and Oversight Services
  • Training Services
    • Alloy Selection for Corrosive Environments
    • Solving Corrosion and Materials Problems for Plant Engineers
    • Welding Essentials for Plant Engineers
    • Brick and Tile-Lined Equipment Inspection and Repair
    • FRP Essentials for Pulp and Paper Mills
    • Concrete Restoration and Protection
    • Quality Assurance for Capital Projects

home  |  projects  |  services  |  experience  |  contact
© Copyright 2009-2017 Corrosion Probe, Inc.

Website design and development by Optimum Technology Solutions, Albany GA